Focus Fanatics Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
198 Posts
Discussion Starter #1 (Edited)
Latest Alignment printout. Tires were badly cupped in rear and had to replace them. I asked for 0" toe in front and .04" in rear. This is what he did. He claimed total rear toe was supposed to be at .50 deg. I don't know what this is in inches.

Are these readings going to be ok? I have the tires rotated every 5k, but looks like I will have to get it done more often since rear eats tires every 20k.



 
1 - 1 of 1 Posts
Top