Focus Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
I Just Bought Some 12" Neon Lights For The Interrior Of My Car Off Of Ebay. And I Was Wondering What Is The Easiest Way To Wire My Lights. I Have A Switch And I Was Wondering Is Someone Could Giver Me Some Pointers Of How To Wire My Neon To My Power Supply And My Switch! Thank You.
 

·
Registered
Joined
·
4,805 Posts
negative wire the screw attached to the corner of the fuse block under the steering wheel... that's a common ground.

the positive wire, I attached to the wire that is on, when you turn on the headlamps... it makes sense, since no one can see the neon's in the day-time anyways. If I remember correctly, it's a orange and black wire... (the plug attached to the headlamp switch)

I could be wrong about the color...
 

·
Registered
Joined
·
407 Posts
ditto, but i ran the positive wire to the battery since there is a switch you can easily turn it off and on, and theres some exceptions to the headlights because what if it rains then you need your lights on and you still cant see neon[thumb]
 
1 - 3 of 3 Posts
Top