inside door jamb light switch/sensor
3261
2
Hello all, new to the forums here. I have a question about a part for my 2001 ZX3. Ive looked at numerous of the OEM part sites and Google searches to try and find a diagram for the part number, however I'm at a loss for on how it would be name or the nomenclature of the device.
Anyways my issue..
On my passenger side, there is a sensor/switch inside where the door closes telling the dome light inside the car to turn on when the door is open. It sits right be hind where the door latches. The sensor/switch on the passenger side works, however not on the driver side. Does anyone know of the part number for this device? Any help is much appreciated.
Anyways my issue..
On my passenger side, there is a sensor/switch inside where the door closes telling the dome light inside the car to turn on when the door is open. It sits right be hind where the door latches. The sensor/switch on the passenger side works, however not on the driver side. Does anyone know of the part number for this device? Any help is much appreciated.
1 - 3 of 3 Posts
Joined
·
3,392 Posts
The switch itself seldom fails.
If you push it in and you feel good spring pressure and it moves freely, the problem is likely the wiring/wiring connector on the back of the switch. Remove the swtch and inspect before buying parts. It could be a simple as needing to replace/reconnect a wiring end. Two wires: black/yellow and black (ground).
The switch is a simple plunger-type circuit interrupter; nothing complicated.
If you push it in and you feel good spring pressure and it moves freely, the problem is likely the wiring/wiring connector on the back of the switch. Remove the swtch and inspect before buying parts. It could be a simple as needing to replace/reconnect a wiring end. Two wires: black/yellow and black (ground).
The switch is a simple plunger-type circuit interrupter; nothing complicated.
1 - 3 of 3 Posts
