Focus Fanatics Forum banner
1 - 3 of 3 Posts

·
Banned
Joined
·
7,946 Posts
Discussion Starter · #1 ·
I recently got my INPros. problem is, is that they fog up nearly everytime they get wet. has anyone else here had the same problem? its bad enough that the condensation drips down the inside of the lens.

anyone with advise? am i going to have to bake them and reseal them? i dont have a problem with doing it, cuz i have previously baked/resealed 3 other headlights with no ill effects. its just that its a hassle and im sick of doing projects on the car that require more than a day's time.
 

·
Registered
Joined
·
1,467 Posts
my euros have a crack in one and both without back plates. they are slowly slowly starting to fog up in the inside.

if theres too much breathing air, like mine, it will not fog up as fast.

if theres no breathing air, there they will get fogged up faster with the moisture you have in there.

have you thought about removing the back plates for breathing air??? is there an exhaust port on the back of the headlight?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top