Focus Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
Hello!

I`m new and I`m an foreigner, so forgive my mistakes. I`m writing this post because my friend, here in Poland, Europe, need some help with his FF ZX4 and he has some problem with access to technical documentation.

Here is the problem:
He told me to ask you about dimension beetween screw holding McPherson columns. If somebody could stand in front of his car and measured distance beetween screws on McPherson (there are 3 screws), especially his is interested with those which are closer to front bumper of the car. Additionally, he asked me to ask you to remove that screw and measure distance from-to middle of the holes. It is very important, because the car was hit and he need it to repair that car properly.


Hope it clear and someone can help me and my friend.

Best regards from shiny Poland

MarcinM
 
1 - 3 of 3 Posts
Top