Focus Fanatics Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter #1
I have a DDM 4500K HID kit already, just installed a few days ago. That was only temporary for having the HIDs in the stock housings. Now since I have the HID kit, and every thing all I need is the Morimoto H1 minis. I'm going to be buying the SVT style housings. I want to know how do I actually retrofit them. What's all the modifications will I have to do? Does any one know who can retrofit them for me if I decide not to do it my self in the Conroe, Texas area?

Please give me a list of every thing I need, and how to modify the lights?
 

·
Registered
Joined
·
761 Posts
You can go to YouTube and get an idea from there is not to difficult,some rtv , dremmel and an oven
 

·
Registered
Joined
·
68 Posts
Discussion Starter #3
I want to know is there any modification needed with my 2002 headlight? Also does the shroud need to be trimmed in order to fit? I want the Gatling gun.
 

·
R.I.P Kona
Joined
·
12,868 Posts
Get the morimoto mini h1 5.0. The projector is pretty simple as it should just fit in the already existing hole. If not then there is would only be a tiny bit to dremel out. It has a threaded system to lock it in place. Pretty straightforward and simple. If you want the shrouds flush you may need to trim a little. Just test fit the shrouds first to see how you like them and go from there. And why spend the money on buying the black housings. They're the same as stock except they're black. You still have to crack them open. I would just use your stock ones and paint the insides black and polish the lenses. Would look brand new practically and save you some $$$. Unless yours are trashed.
 

·
Chef Boyardee
Joined
·
2,710 Posts
Im doing the same when I crack em open, just priming and throwing down some black paint on everything to black em out, and just have a nice chrome shroud covering em. should look sick. hope to do it soon, just gotta buy it all still
 

·
Registered
Joined
·
68 Posts
Discussion Starter #7
Get the morimoto mini h1 5.0. The projector is pretty simple as it should just fit in the already existing hole. If not then there is would only be a tiny bit to dremel out. It has a threaded system to lock it in place. Pretty straightforward and simple. If you want the shrouds flush you may need to trim a little. Just test fit the shrouds first to see how you like them and go from there. And why spend the money on buying the black housings. They're the same as stock except they're black. You still have to crack them open. I would just use your stock ones and paint the insides black and polish the lenses. Would look brand new practically and save you some $$$. Unless yours are trashed.
I hopefully can do it next payday, but I still have to order me some new housings. The stockies are trash. The lenses can't be polished, I can't explain the look of them, plus their not clear with some cracks. The mounting spots are also broke. I want the morimoto 5.0 so I'm getting the PNP kit. If I want to run halos, which color should look best, white, or amber with my yellow zx3, plus the audi style LED strips. How do I wire those up? To the wire that powers the parking lights?
 

·
Registered
Joined
·
68 Posts
Discussion Starter #8
Im doing the same when I crack em open, just priming and throwing down some black paint on everything to black em out, and just have a nice chrome shroud covering em. should look sick. hope to do it soon, just gotta buy it all still
Awesome, post up pics when you get around to it. I kinda want to do demon eyes, but I'm a novice to wiring.
 
1 - 9 of 9 Posts
Top