Focus Fanatics Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
What is the procedure to remove the inside door molding without breaking it (the part that goes from the top down along side the windshield)? I have a 2003 ZTW. Thanks in advance.
Mike
 

·
Registered
Joined
·
296 Posts
yeah inline is right there are just little plastic tabs with metal clips on the trim and they just pull off. just be careful to pull straight that way you dont bend/crease the trim or break the plastic tab. thats actually the A-pillar trim.
 

·
Registered
Joined
·
14 Posts
also take off the piece that the seat belt goes into too. that will make it much easier to get the last clip out. there is a little circle piece on the front of the seat belt piece that you gotta get out first then that just pulls off too.
 

·
Registered
Joined
·
296 Posts
Nope that's not it. he got a little confused he actually wants the A-pillar trim not the door trim. you know the piece that runs up along side the windshield.
 
1 - 9 of 9 Posts
Top