So, My brakes were making this clicking noise that i could also feel in the brake pedal (driver front). I removed the brakes to clean in up and add grease to contact points. When putting back in the guide pin, i tripped the female threads on the knuckle. I fixed it with a heli coil thread repair kit. While i was down there i replaced the whole front end brakes on both sides (rotors, pads, and new guide pins as well). After this brake job it still has the same problem. Clicking that i can hear and feel from the pedal (medium pitch and med-fast pased at slow speed). I know i have bad cv joint joints but thats on the other side (pass, front). Any ideas on what this could be??