Focus Fanatics Forum banner
1 - 2 of 13 Posts

· Registered
11 Posts
Discussion Starter · #1 ·
Hi Guys,

Need some help.

I recently bought a 2002 Ford Focus 1.6 (Petrol) - with the heater not working on any settings.

I bought and changed the resistor in the hope that would fix it.. No luck there
Changed the blown fuse ... still no luck.

Now if I turn the settings up to speed 4 the fuse, under the bonnet, just blows.

I pulled the whole glove-box covers off to look at the motor and wiring. The motor, although not blowing, still responds to the air circulating feature by opening and closing.

Where do I go now with this problem? Is it the motor? the switches? short wire? How can I eliminate things as I don't want to buy a new motor and switches without needing too.

Any help would be great... Thanks Chris
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.