Focus Fanatics Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hey guys-

I just got my focus on wensday, 2001 ZX3 with 52K, woot.. but this eve i ran into some trouble while i was working on my head unit. Some how my battery wire got pulled out of head units (Pionner DEH-6500) wiring harness, and well.. boom went a fuse. The question i have is does anyone know where that fuse would be located, and if its one of the small fuses in the fuse compartment.. what number it is.

I would really appreciate the help, thanks guys.


-Kramar.
 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
I dont have a fuse 8, ( mine goes from 60s to 30s), do you know what size the fuse is? I Have a fuse 32, its 10A.

Thanks for the help

-Kramar.
 

·
Registered
Joined
·
12 Posts
Discussion Starter #6
Hey guys,


Thanks for the help. That diagram was what i was looking for. Unfortunetly my car did not come with an owners manual :(.

Got everything to work, sounds awsome!

On a side note, does any know if the deh-6500 (pioneer head unit) is 2 ohm stable or even worth running two ohm mode? I have 2 extra 4 ways, and 3 way 6.5s that i was thinking about running off of the rear output channels, but i dont know if it has been done, and if so how good of an idea that really is .

Thanks guys again for your help

-kramar.
 
1 - 7 of 7 Posts
Top