Focus Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hey guys I was hoping you might have some input for me. I drive a 2014 SE and I picked up some halos for my headlights. I know I'm going to have to do a custom job to get there installed and I was hoping for ideas.

How will I mount these? My original thought was I could just shove them in there and hope for the best. Probably not a good idea though. Could I mount a projector shroud in the housing to mount the halo to?

Any ideas will help. Thanks!
 

·
Premium Member
Joined
·
44,595 Posts
Welcome!

Moved this to the MkIII section where you can find more info./help.
 

·
Registered
Joined
·
340 Posts
If you're gonna go through the trouble of opening the light you may as well do a projector retrofit and mount the halo to the shroud
 

·
Registered
Joined
·
1,391 Posts
You will need to go to theretrofitsource.com and look around. Also google headlight junkies. There's a forum there with tons of information.
 
1 - 5 of 5 Posts
Top