Focus Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter #1
So my 2010 focus has accumulated to me what seems to be a ground wiring issue an or where the ground connects too. Iv replaced/ clean 4 of the connections of which 2 bolts broke off in the body an 1 got stuck so i just replaced the end of the ground. Now this has somewhat rectified SOME of my issue but still it wants to kinda stall at times but never fully does. With that being said, the ones I have cleaned/replaced were the 3 on the driver side fender an the one under the coolant, oh and that one up on the struck tower where it kinda hangs off. I can't for the life of me figure out where the rest of them are an need you guys to rain some knowledge down on me
 

·
Registered
Joined
·
147 Posts
Discussion Starter #3
my buddy who helped me wither the ground points, instead up putting them back in their spots he put the connectors on top of each other an put a bolt through them, the 3 on the driver side fender. Is that okay or should I switch them around
 
1 - 3 of 3 Posts
Top