Focus Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
607 Posts
Discussion Starter #1
which will make you faster in the drag for Manuel transmission;

(i am not talking about any kind of autotrans or sequential trans...)

to use a short rated gearbox say u finish all 5-6 gears at the end of 1/4mile ???


or

using longer rated gearbox like finishing 1/4 mile at 3rd gear??? less the gear change and less the wasted time by the changing gear...

which logic is true in the drag strip??
 

·
Registered
Joined
·
1,067 Posts
I guess it would really depend on the powerband in your motor. If you have a very narrow window of high torque output, then a short ratio is your best bet.

If you have gobs of tourque all over the RPM range, the tall gears won't hurt so much.
 

·
Registered
Joined
·
607 Posts
Discussion Starter #3
nice point; power band...

hýmmm.. i think answer all depends on the power output and the power band...
 

·
Registered
Joined
·
789 Posts
you would want to have longer gears so you can get the most mph out of each gear, oh course without going over board; you don't want a first gear that can do 80. i would say get gears that would let you run about 40, give or take, in first about65 or 70 in 2nd and about 90 in third. that should give you descent times at the track. take a look at this article about gearing.

http://www.overboost.com/story_intro.asp?id=1348
 

·
Registered
Joined
·
607 Posts
Discussion Starter #5
thanx for your help.. i read the article. it helped me to clear the questions in my head...
 
1 - 5 of 5 Posts
Top