Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hi guys.
My turbo failed, the car is ff mk2 1.6 90ps 2005.

From what I can find, we can pretty much use turbo from peugeot/citroen, etc. as they are sharing same engine.

My big question is: will turbo from 110ps version fit 90ps? DV6 engine

What cars I can take the turbo out? All 1.6 HDI's should be fine,isn't it?

I would appreciate if someone will advise/direct to info regarding turbo as after reading lots of staff online not much useful info [?|]
 

·
Premium Member
Joined
·
44,595 Posts
I'll try this in General Tech Chat, MAYBE someone with info. will see it there...
 

·
Super Moderator
Joined
·
9,564 Posts
Moving this to "General Forced Induction". The main problem we have here is that most of us on this site don't have access to either of the motors or turbos that you listed. We don't have the same types of motors here on this side of the pond for our Focus. For the MK1 we either got the 2.0 Zetec, 2.0 SPI or 2.3 Duratec PZEV motors. So, I am afraid your question might go unanswered on here. But hopefully someone will come along and have a possible answer for you.
 
1 - 4 of 4 Posts
Top