so, I have another problem, I bought a 2003 Ford Forcus TPS sensor from autozone ( or I think it is) now obviosly the postion of the TPS sensor "SHOULD" be up and down if you look at the picutre above its where it says " 03 ATX 03 5 Spd "
my TPS, however, does NOT turn far enough to reach them holes, the only holes it reaches is the , were it says " 00-02 ATX" hole
Mabey I have the wrong TPS sensor ? or my TB is fu#c$ed ? or mabey I have a 2000 TB? I swear I bought a 2003. How can you tell?
the 00-02 have a spot for the cruise control cable near the throttle cable and the 03+ have a large piece of metal that for lack of better words is just big...and no spot for cruise near the throttle cable
ok so I def have a 2003 TB, now about my TPS sensor, why wont it turn far enough to reavh the top and bottom? I have a manual trans car and it is suppos to be mounted straight up and down. are the 00 Focus TPS the same as the 2003 TPS? are the manual TPS the same as an automatic TPS? What if I got sent a Duratec TPS sensor?
Can u guys with a 2003 manual trans please post a picture of how ur TPS is mounted and help me get a part number ?
yes sir, sorry, I have an escort zx2 and putting this F/C 2003 Tb on my car, when my buddy datalogged my car with SCt tuner, the TPS showed that the car was reading at WOT, when the butterfly on the TB was fully closed.....
I am going to ry the other postion tonight, the postion that says " 00-02 5 SPD" that seems like it MAY work, I should hope it does!!