Focus Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,183 Posts
Discussion Starter #1 (Edited)
So, guys, i have bought a turbo, i bought a T25 that has maybe 45K miles on it. it is the stock turbo off of an SR20DET, and i am going to have it rebuilt. #1, what size FMIC would i use? i just need ball park figures here, and then, i need to know where i can get a manifold made for a T2. top mount preferibly. iObviosuly from my avatar, i have a 2002 SVT. plan to maybe run 10-14 PSI, and have a torque motor, and a street stalker. Also, where can i get a universal intercooler piping kit? thanks guys.
 

·
Registered
Joined
·
321 Posts
The intercooler I just picked up is 27x6x3. I'll let you know how well it fits this weekend. :D

I picked up a universal intercooler piping kit off ebay. 2.5 inch mandrel bends, clamps and silicone couplers for $86 us dollars.
 

·
Registered
Joined
·
1,183 Posts
Discussion Starter #3
schweet. i was thinking about a smaller intercooler, like a 18x6.5x3.5 i know it will fit easily, and with the type of application i plan to run, it might be all that i need.
 
1 - 3 of 3 Posts
Top