Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
975 Posts
Discussion Starter #1
Hey guys just wondering if i had to get my clutch which is a stage 3 changed out would u need to resurface the flywheel. If yes where can i get that done from? how much it costs? and is it that necessary?

Also when i changed to my stage 3 clutch i didn't get a throwout bearing was i supposed to ? thanks for the help guys
 

·
Registered
Joined
·
15 Posts
Yes, you are supoose to resurface the flywheel. Check with machine shops or anyone that resurfaces brake disc. Don;t know how much.

I could not find a place to do mine on the weekend. So I did not get it done. Got a good 30K on it with no problems.

It is recommended that you replace the throw out bearing while you are in there.
 

·
Registered
Joined
·
1,067 Posts
do you still have a stock flywheel? If so, now is the perfect time to change out to an aluminum one. Then you will never have to deal with a machine shop again.
With the aluminum ones, you can just replace the steel insert each clutch change, costs like 40 bucks.
 
1 - 4 of 4 Posts
Top