Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
496 Posts
Discussion Starter #1
I just had my MBRP exhaust installed and I need an aftermarket flex/extension pipe to go from my cat to the start of my exhaust. I am going with a FR shorty and Random Tech Hi-Flow cat due to emission laws. I wanted to go SVT but I just dont have that type of money right now.

http://www.newedgeperformance.com/index.asp?PageAction=VIEWPROD&ProdID=103

http://www.newedgeperformance.com/index.asp?PageAction=VIEWPROD&ProdID=37&HS=1

^^these are the only ones I could find, they're the same pipe right? Which one would work best? Any help will be appreciated...[:)]
 

·
Focused Focus
Joined
·
6,403 Posts
Most any muffler shop can get or carries the different diameter flex extensions. You may be able to just pic on up from one and have them install it for you. Just an idea
 

·
Registered
Joined
·
496 Posts
Discussion Starter #3
The place that put my exhaust on told me they could build and install a custom one for $100. I just thought the one's I posted where a higher quality flex/extenison pipe.
 

·
Registered
Joined
·
189 Posts
I have the Bosal with that same set up you're planning on. It fits well. I got the flex used, and I'll be replacing it soon (had a kink on the pipe, but was fixed). If it wasn't kinked to begin with, I would keep it.

If $$ is an issue, check with your local muffler shop, as they could make one for you a little less.

Good luck!
 
1 - 4 of 4 Posts
Top