Focus Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
How easy or hard is this part to replace. I had been having some popping sounds and changed endlinks and installed svt suspension. Strut bearings were bad and thought all my popping sounds were over till I noticed d/s mount tore up. Thank you for your help.
 

·
Focus "Sleeper"
Joined
·
1,619 Posts
Mount is easy to change. I did mine in the driveway with a jack, block of wood, and a basic set of sockets in about 30 mins. Follow the instructions I have posted bellow and you are set.

THese instructions are for a performance mount. If you are doing a stock replacement, then you wont need the 27 mm socket.


http://www.focushacks.com/index.php?modid=62
 

·
Registered
Joined
·
31 Posts
Discussion Starter #3
Thanks. That makes me feel better. I was going to take out the air filter and do a diy stealth or sri anyway. I will do both of these at the same time. Rep for finding info I couldn't.
 
1 - 3 of 3 Posts
Top