Focus Fanatics Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
381 Posts
Discussion Starter #1 (Edited)
Custom SVT exhaust 3-piece ->ON EBAY<-

Selling custom made (took about 15 hours) / modified SVT Focus Exhaust.

The stock svt focus exhaust is mandrel bent 2.25 pipe, but I went a step further.

I subtracted the large, clunky center muffler from factory, and I added a smaller, straight through, stainless steel XL Performance MAGNAFLOW muffler.
But thats not all...I custom bent pipe from that center muffler (2.25") to a megan racing stainless canister with a 4.5" tip that protrudes out the rear of the car, much like the Porsche Boxer.
The mounts are also custom and the rear canister has two mounts that bolt into the spare tire bin. When I had it mounted, it ran flawless and sounded very, very deep (deeper then Borla).

The system is complete (flex pipe back/resonator/centermuffler/canister) and sectioned into three pieces. Shipping should be around $40 anywhere in the US.
I'd like $300 obo for the complete exhaust...
but as you know I just put the system on E-Bay!
$20.00 NO RESERVE.



Don't miss out!



E-mail: [email protected]

<img src='http://img.villagephotos.com/p/2004-5/736156/exhaustshots001.jpg' width=720 height=480 >
<img src='http://img.villagephotos.com/p/2004-5/736156/exhaustshots004.jpg' width=720 height=480 >
<img src='http://img.villagephotos.com/p/2004-5/736156/exhaustsh003.jpg' width=630 height=420 >
<img src='http://img.villagephotos.com/p/2004-5/736156/exhaustshot007.jpg' width=576 height=384 >
<img src='http://img.villagephotos.com/p/2004-5/736156/mufflers006.jpg' width=540 height=360 >
<img src='http://img.villagephotos.com/p/2004-5/736156/mufflers005.jpg' width=540 height=360 >
[thumb] [thumb]
 

·
Registered
Joined
·
381 Posts
Discussion Starter #7
This is a selling forum, Im trying to sell a very nice custom exhaust.

Please keep comments to yourself if non-topic related.
 

·
Registered
Joined
·
381 Posts
Discussion Starter #12
<img src='http://img.villagephotos.com/p/2004-5/736156/svtdynoxxx.jpg' width=1080 height=720 >

i had a cold air intake, cams, and this exhaust at the time, rest was stock svt...
 

·
Registered
Joined
·
381 Posts
Discussion Starter #15
It is cut into three pieces for easy shipment/install which means you have to weld/attach brackets. Look at the eBay pictures for better clarity.

2 Days Left On Auction!!
eBay.com
search: custom svt focus exhaust


[thumb]
expect more custom work from me soon
 
1 - 15 of 15 Posts
Top