[wesley4x4]

hey guys/gals just curious if you have had an issue with comp turbo misting oil out of the exhaust port. i was told by the manufacture to just wait it out for 100 miles and see if the issue will resolve itself as the seal might have not seated. yes the oil is draining and it does have the correct restrictor plate for the inlet. ive only driven about 10 miles on the setup sofar and still in the tuning process. so should i just wait it out like the manfacture says or what are your thaughts. thanks in advance for any useful info

 

[1turbofocus]

Do what the manufacture said to do , yes there has been issues in the past with the oil seals but with a restrictor the problems seem to of gone away

What size drain like do you have ? what angle fitting for the drain line , what size feed lines

Tom