Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
110 Posts
Discussion Starter #1
I'm pretty sure they will fit, but can anyone confirm this.

I want to use these caps on the 10 spoke alloy wheels on a 2000 Focus. The old larger caps were broken and worn and I thought that these would look better to cover the holes.



I just want to be 100% sure before I spend money on them.
 

·
Meh.
Joined
·
10,609 Posts
No, I'm pretty sure they will not fit. The hub cutout where they snap in is different for these caps versus the one you have. I have a similar problem with my winter rims; all I did to cover the hub was cut the bottom of a soda can, paint it, and jam it in the hole.
 

·
Premium Member
Joined
·
6,442 Posts
Moved to "Wheels, Tires, Brakes & Suspension - Sponsored By Tire Rack"
 

·
Registered
Joined
·
110 Posts
Discussion Starter #4
No, I'm pretty sure they will not fit. The hub cutout where they snap in is different for these caps versus the one you have. I have a similar problem with my winter rims; all I did to cover the hub was cut the bottom of a soda can, paint it, and jam it in the hole.
Thanks for the info. It would be cheaper to make my own anyhow so I will look into that.
 
1 - 4 of 4 Posts
Top