Focus Fanatics Forum banner

Built 2005 ZX4 for sale

2053 Views 9 Replies 5 Participants Last post by  davidjames33
After many years of enjoyment, it is time for me to depart with the Focus. I found that the #2 cylinder is eating some antifreeze and I have too many competing priorities to justify keeping this car. I have removed the engine and will be parting it out separately. My loss is your gain! At this point, I will see if anyone wants to buy the car as-is without the engine. Here is the list:
2005 ZX4 Manual, no engine.
MTX-75 transmission with Quaife differential
VF Trans Mount
Includes both 2.0 and 2.3 engine mount frames
Lightweight tubular radiator support with integral hood pins(open up lots of space for engine build)
Lightweight hood (stock hood with frame removed, also opens up space)
Stock radiator and fans (good condition)
Functional A/C and Power Steering
SS Braided fuel line (fits stock fuel rail)
Main Fuze box relocated to interior
Evap system removed
FS Werks stealth exhaust system
H&R Coil Over suspension front and rear
Eibach sway bars, welded in rear mounts, heavy duty Moog end-links in front
SS Braided brake lines front and rear
Stock brakes
Kosei K8R 17x7 wheels
ARP wheel studs in front
Full set polyurethane suspension bushings
Turbosmart Eboost2 boost controller with boost by gear (micro-switches in shifter mechanism) works flawlessly
Custom gated shifter mechanism, automatically locks out 1st and 2nd on upshift, impossible to miss 3rd gear
Wideband UEGO controller gauge
Pyrometer gauge
Oil Pressure gauge
Oil Temp gauge
Voltmeter gauge (wired to fuel pump booster)
5 inch tach with shift light
JMS Powermax Fuel Pump Booster
Lightweight bucket seats in front
No Carpet, rest of interior is stock

Price: $2,000
Location: Navarre FL
Person Selling: Myself
Clean title
Let me know if you want any other specific pictures


The aluminum bar is there to hold up the A/C compressor and keep the trans level during transportation. A/C system is still sealed.

1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.