[slow_solo_focus]

hey all, not sure if this belongs here or in tech help but here it goes.

i bought some ford racing wires and a zx2 coil pack off of a the BST section of facebook. tonight i tried replacing my stock coil pack and wires w/ the new ones and the car cranks over and sounds like it wants to start but no dice. is there anything im missing to get this working?

im aware the stock stuff is fine but i got these as they were dirt cheap and worth a few bucks to risk it on.

 

[1turbofocus]

If you have it wired correctly then I would go back to stock , if it runs right stock the ZX2 parts are bad

Tom

 

[slow_solo_focus]

Damn, I'll double check to make sure it's wired correctly.

Runs fine stock

 

[slow_solo_focus]

Everything is wired correctly but there is a short at the sensor the way the zx2 coil pack twists so it fits.



Some electrical tape and all is golden again.



Thanks tom

 

[zetecDon]

Moved to "General Technical Chat".

 

[slow_solo_focus]

Feel free to close, its solved now.