Focus Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
So i've been searching the internet for a how to on converting my 2001 Focus's manual locks into automatics. This is my first post, and mostly just want info on this if you can help me, no-one can. I've already swapped out the actuators from a donor focus from a junkyard, I have the switches and everything installed, including the wiring grommet connecting from my door to the firewall. My lock switch is not recieving any power, so i'm guessing I need to run more wires thru the firewall (at the inside of the door) and into something I read called the central locking module. I don't even know if the 2001 came with it without power locks, or even where it's located. Is this my problem? I'd appreciate some help, I don't have any pics because I put it all back together and it's my daily driver, so when I take it apart again i'd like to recieve an answer before doing it. Thanks in advance.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top