Focus Fanatics Forum banner

Aftermarket Steering Wheel installation?

1456 2
Helo my name is Antonio i from Portugal and i havê a DUT
I want to install a Momo Steering Wheel and a hub from Sparco that i all ready havê.is necessary to take of the clock spring to put the hub, or not.Many thanks
1 - 1 of 1 Posts

· Premium Member
Joined
·
50,838 Posts
New thread made, and moved to a better section.

The question I have is whether your replacement Wheel/hub is made to work with ANY of the clockspring functions.

Basic replacement steering wheel as I used many times in the past wouldn't work, as they were set up for only a horn button & wouldn't work with a clock spring setup for multiple additional functions. That type would bolt on, but even horn would need separate wiring/switch to work.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top