Focus Fanatics Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Retired Fanatic
Joined
·
20,000 Posts
Discussion Starter #1
Accessory Drive Belt Replacement (original by TeamFocus)

Vehicles with 2.0L SPI Engine


Removal

1. Raise and support the vehicle. For additional information, refer Here.

2. Remove the accessory drive belt splash shield.

3. Lower the vehicle.




Remove the accessory drive belt.

l. Using a 3/8 inch square drive breaker bar in the hole provided, rotate the tensioner clockwise.




Installation

1. To install, reverse the removal procedure.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top