Focus Fanatics Forum banner

2002 Fuel Pump

249 Views 3 Replies 3 Participants Last post by  Miles D. Riven
I’m working on a 2002 focus with a no start issue. Checked plugs first and have good spark. Listened for the pump, didn’t hear anything. Pulled the fuel filter and got black, nasty crap from the input side, and no fuel flow with the filter off and the key on. Thinking I’ll be pulling the tank for a new pump, but plugged in my OBD scanner to check for anything else beforehand. No scanner connection power, so check the fuses (lighter and data connection) All good there, so checked the OBD connector itself for a bad pin. This connector has only 7 wired pins. No power pin at all (16). OK, broken connector pin? No, the harness only has 7 wires!
Any idea?

tia
mark
Gas Machine Electronic device Bumper Rectangle
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Top