Focus Fanatics Forum banner

1 - 17 of 17 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
How far can I advance the exhuast and intake and does anyone know if it makes more power by having interlope I plan to keep it NA
 

·
Registered
Joined
·
15,483 Posts
Overlap not interlope............you can move them until you hit valves to bend them, good luck with that.
 

·
w/ my magic bag
Joined
·
29,368 Posts
Throw a pr of cams at it.....if your looking to get anything out of it.
 

·
w/ my magic bag
Joined
·
29,368 Posts
More duration & tight lobe separation.....106-108 ls angle & look for 230-240 degrees duration @ .050....
 

·
Registered
Joined
·
10 Posts
Discussion Starter #10
What J2435 device do you guys recommend for tuning? And does anyone have a basemap for a completely bonestock 2.3?
 

·
w/ my magic bag
Joined
·
29,368 Posts
How much do you charge? And how many uses, I'm looking to make about 235HP and 235 torque or atleast 235 torque
Thats a lot of grunt/power......Yea its doable, start w/ a 25 thou....
 

·
FF Affiliate
Joined
·
30,244 Posts
How much do you charge? And how many uses, I'm looking to make about 235HP and 235 torque or atleast 235 torque
That will be hard to get even if your 2.5 Duratec , I sell the X4 Flasher , full custom Tune , free unlimited NA tune updates , datalogging , US shipped for 462.00

Tom
 

·
Registered
Joined
·
10 Posts
Discussion Starter #15
That will be hard to get even if your 2.5 Duratec , I sell the X4 Flasher , full custom Tune , free unlimited NA tune updates , datalogging , US shipped for 462.00

Tom
Is there a retune Fe or is it a full complete just tune after tune for the one time 462 or pay 462 after a certain amount of uses
 
1 - 17 of 17 Posts
Top