Focus Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
168 Posts
Discussion Starter #1
Anyone know how well the 2.25 in. MBRP exhaust fits the Duratec ZX3? Ive heard that you need to but after the second cat, or its a slip fit. Anyone have experience??
 

·
Jetsetter
Joined
·
6,657 Posts
mine bolted right but, but i have a zetec, tho i havent heard of any fitment issues from anyone that has the MBRP exhaust setup duratec or zetec.
 

·
Registered
Joined
·
152 Posts
i have a zx5 and it was direct bolt up, the only thing is i had to saw off the pipe where it goes over the suspension to get the stock one off, its an easy install, less than an hour
 

·
Registered
Joined
·
851 Posts
It fit better on my Duratec than on my Zetec. The problem on mine (04 2.3) was there was this little nub that got in the way of bolting the exhaust to the flexpipe. I'll try to get pics later to see what I'm talking about. Nothing a cutoff wheel couldn't handle.
 

·
Registered
Joined
·
119 Posts
I had to cut in two places, after the second cat, cuz thats where the resonator connects too, and after the muffler so i could get it out. i have a 2007 2.0 duratec
 
1 - 5 of 5 Posts
Top