Focus Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter #1
Hi,

I did some searching and I have not found the answer to my questions.

I just installed the svt suspension on my car and I want to get it a alignment
. I plan on running the stock '16' rims for the time being. What should I tell the shop when I get the alignment
. Do I request to have it set up as a 04 svt or do I have them use the 05 specs?

Thanks,

CM
 

·
Gal. 2:20
Joined
·
1,999 Posts
just tell them you don't want it to drift to either side....all you want is for the car to go straight is all.
 

·
Registered
Joined
·
8,023 Posts
Hi,

I did some searching and I have not found the answer to my questions.

I just installed the svt suspension on my car and I want to get it a alignment
. I plan on running the stock '16' rims for the time being. What should I tell the shop when I get the alignment
. Do I request to have it set up as a 04 svt or do I have them use the 05 specs?

Thanks,

CM
Ask them to set it to 02-04 SVT specs with rear "toe-in" as close to the minimum allowable possible (0.04") and just a tad of front "toe-out" (-0.01 to -0.02" or so). If rear camber can not be set to -1.5 degrees or less consider getting camber bolts.
 

·
Gal. 2:20
Joined
·
1,999 Posts
wow Gezzer, your post just kicked my post's ass....lol
 
1 - 5 of 5 Posts
Top