Focus Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 46 Results
  1. SVT Performance (2002-2004)
    Hello fellow Fanatics, So, it's been a while. Here is a quick rundown on my 02. I just rolled 135K on the car. A little bit ago, it was struggling to start, so I replaced the alternator, starter and battery, which, solved that. Then the car developed a misfire and I ended up replacing plugs...
  2. MK3 Focus
    Hi, new guy here. Bought a 2.0L 2014 SE with the 5 speed. Shortly after buying I was driving with the windows down and noticed a scraping sound coming from the passenger front. Sounds like that light scraping you get when pads are low, only it’s at at a dead stop. Popped my hood and it appears...
  3. MK3 Interior Mods & Upgrades
    Hey everyone, as we all know the automatic in the focus SUCKS. Anyone know what to do to make it shift better and be a little more responsive? Like it just switching from first to second is trash. If I wanna do a manual swap I’m going to wait a bit til I do it. Thanks!
  4. MK3 Interior Mods & Upgrades
    Hey everyone. I have a 2015 Focus S 2.0L. I wanna try to at least touch 200hp on it. It’s fun to drive but I need some more power in it. I wanna try to get CARB legal parts cuz Cali emissions is a pain. Any recommendations on would I should do to it to get more power? Parts? I appreciate the help!
  5. FocusFest - Build Journals
    Doing some research since i wanna build this car up, ive heard it all before about it not being worth it and all the related conversations what im looking for theoretically is would it fit. Right now im looking to see if a ls1 would fit in that engine bay for a 2014 focus se, i would love to see...
  6. MK1 Focus
    So ever since I installed my VF engineering Poly Mounts (Engine/passenger and Transmission/Driver) I've had an issue with engine misalignment. This was most pronounced when I went to change my dogbone mount and noticed the entire engine was at the wrong angle to fit the mount in properly and I...
  7. ZETEC Performance (2000-2004)
    I have a 2001 Ford Focus ZX3 auto with the 2.0 DOHC Zetec engine. The car is running horribly and a very wrong IAT reading points to the MAF sensor. I was trying to find a replacement MAF sensor and I just keep find more and more confusing information. The MAF sensor that is currently on the car...
  8. General Technical Chat
    Hi everyone, First time posting here and wanted to get some advice about a used 2015 Ford Focus I am in the process of purchasing. It's a 6 speed manual with a 1.0 L 3 cyl. turbo ecoboost engine. The car has 90k miles on it and is being sold by an official Kia dealership. Nothing too concerning...
  9. Engine & Transmission Swap
    need help knowing if I can use a 2007 Ford Focus engine to replace my blown 2003 Ford Focus engine. Long Story but I didn't do it.
  10. New Members Check In!
    Hello everyone ! I got a 2009 Ford Focus mk2 1.6 TDCi . In the past days during cold start in the morning after passing 1500 rpm the car starts to fail and sometimes goes off. Today it started and immediately goes off. Just during cold start in the morning . During dhe day its starts regularly...
  11. MK2 Focus
    Hey everyone! Looking for a little help. I don't know much about cars (I'm slowly learning so I have to rely less on my boyfriends and won't get charged a 'newbie girl' fee at a mechanic). I recently purchased a trade-in Ford Focus 2010 LX (125,000km) from a showroom dealer and I'm having a...
  12. DURATEC Performance (2008-2011)
    Hello Everyone! I'm owning a Ford Focus 1.6 2011. My recent issue is,when you slow down and its not in gear the car switches off. Took it to few mechanic they cannot find the problem. All the time serviced and its in mint condition except this issue. Any ideas? Thanks in advance.
  13. ZETEC Performance (2000-2004)
    Hi I have a 2003 ford focus zx5 and I've been wanting to do some things to increase performance of the engine I always see alot of good info in these threads but where would I start and what would be a good idea for a 17 year old engine with 130,000 miles on it. Any ideas on where I could start?
  14. New Members Check In!
    What is the newest engine that can be put into my 2004 Ford Focus ZX3 2.3L? I am wanting to keep the 2.3L engine, if that is possible. Also I am wanting to do an amateur paint job on my car myself. Just thought I'd throw that in!!
  15. MK1 Focus
    Trying to identify the part name for this bracket on Mk1 focus. Has snapped where it screws in just above the spark plugs. See arrow on photo. Any idea what the part is to get a replacement. Many thanks
  16. General Technical Chat
    Hi All, In desperate need of a right engine mount for the SVT focus, any type, please let me know if you're selling
  17. General Technical Chat
    Hey, I just bought a 2005 Focus ZX3 and I'm experiencing the vibrations possibly related to bad engine mounts. I got the parts I needed and started getting to work on taking out the passenger side mount, when I noticed one of the bolt heads was sheered off, leaving just the stud. The bolt in...
  18. DURATEC Performance (2003-2007)
    I have a 2007 Ford Focus 2.0L MFI DOHC 4cyl and I cannot figure out if it has a timing belt or chain. I cannot figure out if it is a Zetec or a Duratec. Does anybody know?
  19. ZETEC, SVT & SPI Parts (2000-2004)
    Seller: Steve Price: $400 Contact via PM or Phone/Text: (586) 330-9739 I have a spare motor that was supposedly burnt up cyl 2 or something from the previous owner. I got it with the car when I bought it. It has been in a giant Tupperware container packed in Styrofoam for a few years. It's...
  20. Want To Buy
    Thanks for checking this out, I recently got an '01 ford focus zx3, and am seeing if I can find a couple things for it. -A Cold Air Intake -Any engine upgrades-cams, intake, cylinder head assembly. I suppose if you have a turbo kit i'd check it out, but currently wouldn't have all the moneys...
1-20 of 46 Results