Focus Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 41 Results
  1. DURATEC Ti-VCT Performance (2012-Current)
    My dual mass flywheel broke last year , i got it replaced 2 weeks ago with the clutch line from clutchmasters . First impressions are very good : it got rid of some of the horrible revhang ( tuning should make it even better ) , quicker acceleration ( not enough to make a huge difference ) the...
  2. General Technical Chat
    Hey guys, pretty new here so im probably posting this in the wrong section....my apologies. So I've got a 2017 st and have had it for about 4 months now. Been loving every minute of driving the car. Recently I had my passenger motor mount blow out, leading to very excessive vibrations when...
  3. General Technical Chat
    Hello everyone, I recently had my check engine light go on. I was driving and my 2015 focus was not accelerating as quickly; it was shifting from 1st to 4th gear at 25mph. I figured it was the TCM extended warranty--14M02. I brought it to the nearby dealership, and learned that they will...
  4. MK1 Focus
    So what’s the trick to installimg the transmissions off these easily? I helped a buddy do a clutch on his 07 zx4 figured well its the same as my car so if its not too bad ill do my own clutch… getting the trans back in was a nightmare even with two guys and a lift… but i cant get mine on a lift...
  5. MK2 Focus
    Needing some advice. Just installed a new clutch kit on my 2009 ford focus it all went back together fine except after 10 hours of bleeding I still can't get the car to go in gear. Anybody have a similar experience or know what I should do? Thanks.
  6. MK3 Focus
    I've removed the trans on my car three times now and I still can't get reverse to work. The reason I took this car apart to begin with was codes p087A and P287A and those codes are still there. In my third attempt, I replaced everything in the trans, new forks, new release bearing and a new...
  7. MK3 Focus
    I took the transmission out so that I could fix the clutch forks. I've been trying to reset the clutch but it won't stay. There's these tabs that have to be slid over while the tool presses down on the clutch. Once all of the pins are in, the tab should stay in place. But no matter how much or...
  8. MK1 Focus
    Seen several videos where they just cleaned it up, or can it be resurfaced? Clutch is not slipping. Slave has been leaking for 2 years! Afraid I won't be able to get it out of gear. I colder weather it happened, so I let it warm up 10 minutes, then slave works OK (ROFL) Ordered a clutch kit...
  9. SVT Performance (2002-2004)
    Like many many others, id like to get rid of the dual-mass flywheel in my focus, while some have stock cars, and others have modded, I was wondering how it would react to mine, a supercharged/rebuilt (rebuild is in progress, its why I'm replacing clutch while I'm here) motor, just the standard...
  10. MK3 Focus
    If anyone has upgraded the clutch and flywheel on a manual 2012 Focus S Sedan, which one did you get and was it a good upgrade? Do ST clutch/flywheel kits fit the base model? Looking for a stage 2 upgrade if possible.
  11. Focus SVT
    Hey guys, i got home and i started hearing a weird loud noise coming from my engine bay. the car wont start in neutral but when placed in first gear, the car jerks forward or when in reverse it jerks back, even with my foot pushing the clutch pedal all the way down(also doesnt start). Also, the...
  12. MK3 Focus
    I have a 2013 Ford focus that I've just swapped out the automatic transmission for a MTX-75 manual. Everything is hooked up and working, except for when I push in the clutch pedal, it doesn't seem to disengage the clutch enough for me to get it into first gear. Not sure if I need to bleed the...
  13. MK3 TSB, Recall & Problems Archive
    Hello, hope this is the right spot for this question. My car is currently awaiting a new clutch that is on back order. It used to shake all the time at the slightest acceleration, however ironically ever since the part was ordered it has stopped shaking? I feel there is a louder rumbling sound...
  14. MK1 Focus
    Hey guys Im new, not gonna come in here and ask what’s the best performance mods or anything i genuinely need some help or insight. I was just driving my car and I shift into third and I feel the pedal lost pressure so I’m like I gotta turn around, now I’m bleeding the clutch and fluid is...
  15. MK3 Focus
    Hello- I'm just under 90k miles with this car. The issue is when starting from a dead stop in first gear. As I let out the clutch pedal to engage the clutch I sometimes experience slipping, loss of power, shudder, etc. Do I need a new clutch?
  16. SVT Performance (2002-2004)
    I have a 02 focus svt was running good but I noticed at first in like 4th gear at the top end of the gear occasionally the car would like bog and lunge almost like a fuel cut? I thought it was possibly the clutch slipping. Diddnt always do it but a few weeks later the car will bog down as soon...
  17. MK3 TSB, Recall & Problems Archive
    Hello everybody, A couple days ago (from writing this post), I have decided to put extensive research into the Ford Focus Mk3 DPS6 transmission and have learned that random glitches can be a defect of the TCM. So, add this glitch to the list of errors and glitches! Yesterday (as of writing...
  18. General Technical Chat
    I just finished installing the exedy stage 1 clutch and fidanza aluminum fly wheel on my 2016 ST. I have not been been able to get the clutch to fully disengage after and TON of bleeding using a mitivac pump. Has anyone had this issue or can assist? Thanks in advance!
  19. MK3 Focus
    Hello everybody, Another problem with my ford focus mk3 2014 SEL , i bought the car recently have 120k miles on it , had some problems with it but i fixed them all and the car works fine , but recently i noticed some weird things happening i dont know if its normal or not : So the 1st thing i...
  20. MK1 Focus
    This may not be obvious right away, but my uncle and I are having troubles with the hydraulic system for the clutch on a 2005 Focus. Won't shift into gear with clutch depressed, but doesn't grind.. However, when the car is off, we can shift right into gear.. Every gear. The master cylinder under...
1-20 of 41 Results
Top