Focus Fanatics Forum banner

General Information

Name
Alex
Year
2018
Make
Ford
Model
Focus
Color
Black
Packages
SE (Sedan)
Hi there,
I recently pick up some led turn signal lights for my ford focus (Front and Back) When I went to go install the leds in the front I ended up needing to put a resistor in the back as well. When I went to go add the leds for the rear I did everything correct which I think I did. For some reason I can't find a form or place that tells me an exact answer on what wire color is for the rear turn signals. Both the rear turn signals have an orange wire that runs to them that's how I got my front leds to work. The rear led turn signals only for some reason work on one side. Both resistor wiring should be correct I have the resistors connected to the black ground wire coming from the car and the orange turn signal wire coming from the car. I have searched for where to find a relay but I cant seem to find a relay for my car. As on a side note I have checked the front resistors and they are wired in correct both sides. I have already done some bit of research and seems like I don't have a turn signal relay for my turn signals but that its done from the either ecu or bcu and its done by via electromechanically

Any ideas on to what possibly could be the issue any help is needed and appreciated
Thank you for your time and patience

Modifications

Drivetrain
Automatic
Interior
N/A
Exterior
N/A
Audio
N/A
Lighting
Halogen>Led
Exhaust
Stock
Suspension
Stock
Wheel and Tire
Stock

Comments

There are no comments to display.
Top