Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (https://www.focusfanatics.com/forum/)
-   Focus SVT (https://www.focusfanatics.com/forum/focus-svt/)
-   -   Rear suspension help (https://www.focusfanatics.com/forum/focus-svt/812355-rear-suspension-help.html)

triclunderclops 04-21-2019 11:35 AM

Rear suspension help
 
1 Attachment(s)
My lower control arm where the spring sits broke where the sway bar attaches. All the bolts are rusted and it needs cut out. What size bolts do I need to attach the new one?

SVT Enthusiast 04-21-2019 02:19 PM

Looks like you need a new lower control arm....looks like it's cracked-thru & that's definitely unsafe to drive

But judging on the rust, this is going to snow ball on you....

Probably need to add to your shop list:
-Lower Control Arm
-New bolts to mount the lower control arm
-New Shock
-New lower trailing arm [if you "snap" rusty bolts off]
-New bump stop [if it's not included on the arm]
-New sway bar end-links
-Couple spray cans of rust penetrant

Order Ford parts from tascaparts.com or call them at 1-800-598-1484
https://www.tascaparts.com/

Or from AutoNation Ford White Bear Lake 800-328-9552
https://parts.autonationfordwhitebearlake.com/

limeyrider 04-21-2019 05:02 PM

You NEED new arms. DO NOT try to weld them back. All the bushing kits I've seen come with new bolts. You might get lucky and find a good donor car in a junk yard.

felixthecat 04-21-2019 09:39 PM

This^^^^^^ x2

triclunderclops 04-21-2019 10:47 PM

I was wondering where to get the bolts. I wish I could just replace the entire rear subframe, but it is sadly my only rear jack point. This car is slowly earning a spot in the junkyard. I already have new lower control arms.

felixthecat 04-22-2019 12:04 AM

Quote:

Originally Posted by triclunderclops (Post 11374915)
I was wondering where to get the bolts. I wish I could just replace the entire rear subframe, but it is sadly my only rear jack point. This car is slowly earning a spot in the junkyard. I already have new lower control arms.

You can also use the pinch welds....

triclunderclops 04-22-2019 10:18 AM

Pinch welds are gone. Rocker isn't even connected to the pinch welds and if you try you just hear crackling. Its not great.

Magus2727 04-22-2019 10:51 AM

Are you able to lift it by the body rail?

https://live.staticflickr.com/65535/...95ee1aa7_b.jpg

https://live.staticflickr.com/4585/2...c306651f_b.jpg

This is where I had it lifted when working on my rear suspension.

triclunderclops 04-22-2019 07:49 PM

That works just fine. What paint did you use on the frame? Is that undercoating? Also, I have decided to replace the entire subframe. Arenthe bolts threaded into the unibody or are there nuts? What do you do if one breaks? 6 right?

Magus2727 04-23-2019 10:42 AM

There are 6. Use an impact and should be able to brake free. If they do brake (which is fairly rare as they are more protected) then the subframe can still drop and you can use some heat, extractors, and if it comes to it a drill and Helicoil. problem is there is no top side access, it all has to be done from under the vehicle.

I used a combination of POR-15 and a ruberized underbody in both Spray (to get down in to the frame rails) and brush on paint. I was able to cover as much as I could get access to. I know I am not stoping it, but hoping to give it more life. Power washed with high pressure to blast away scale and loose rust and paint. Wire wheel and brushed to scuff and also to get the rest of the rust off. used the POR-15 cleaner, followed by a combo of the POR-15 rust converter and permatex rust converter. Then followed by more high pressure water blast. let it dry over a week, then applied the POR-15, and then let cure and scuffed with pads to apply a few coats of the ruberized underbody coat.

Took me about 6 months of work to get everything off and then put back together.


All times are GMT -5. The time now is 10:26 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.