Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (https://www.focusfanatics.com/forum/)
-   DURATEC Ti-VCT Performance (2012-Current) (https://www.focusfanatics.com/forum/duratec-ti-vct-performance-2012-current/)
-   -   Turbo Tech Racing Driver Side Upper Transmission Mount Ford Focus 2.0L NON-Turbo (https://www.focusfanatics.com/forum/duratec-ti-vct-performance-2012-current/681329-turbo-tech-racing-driver-side-upper-transmission-mount-ford-focus-2-0l-non-turbo.html)

TurboTechRacing 07-05-2016 06:28 PM

Turbo Tech Racing Driver Side Upper Transmission Mount Ford Focus 2.0L NON-Turbo
 
Now Available!!!!

Turbo Tech Racing Driver Side Upper Transmission Mount Ford Focus 2.0L NON-Turbo

Product Link:
https://www.turbotechracing.com/prod...idProduct=5534


@ChalupaJones Thanks for working with us and testing this out!

ChalupaJones 07-05-2016 07:21 PM

Hey guys! Aaron at Turbo Tech has been awesome to work with on this project. I gotta say, their customer service has been phenomenal! I asked them to make me a driver side mount for my car and they followed through with an excellent product!
I've had the mount on my car for about a week now and the improvement has been awesome. There's not a whole lot of added NVH for the amount of benefit. My connection to the vehicle feels much more solid and precise. I love it! I have their PSM as well and will be adding that to the mix to see just how rock solid this motor can be.

To go with my test fitting process, I made an installation how to video, as filmed by my lovely wife. Which can be found here. https://youtu.be/Vt7TNNnXoSU
This mount is a little bit more involved to get to than the other two mounts. For the improvement it's well worth the time and it's not as scary as it might seem to some newbie DIYers.

Thanks to Aaron and Turbo Tech Racing for your awesome customer service and great products just for the mk3 N/A crowd!!!

TurboTechRacing 07-05-2016 07:26 PM

Thanks!

Fabio0716 07-05-2016 11:04 PM

Quote:

Originally Posted by ChalupaJones (Post 9954025)
Hey guys! Aaron at Turbo Tech has been awesome to work with on this project. I gotta say, their customer service has been phenomenal! I asked them to make me a driver side mount for my car and they followed through with an excellent product!
I've had the mount on my car for about a week now and the improvement has been awesome. There's not a whole lot of added NVH for the amount of benefit. My connection to the vehicle feels much more solid and precise. I love it! I have their PSM as well and will be adding that to the mix to see just how rock solid this motor can be.

To go with my test fitting process, I made an installation how to video, as filmed by my lovely wife. Which can be found here. https://youtu.be/Vt7TNNnXoSU
This mount is a little bit more involved to get to than the other two mounts. For the improvement it's well worth the time and it's not as scary as it might seem to some newbie DIYers.

Thanks to Aaron and Turbo Tech Racing for your awesome customer service and great products just for the mk3 N/A crowd!!!

Will the mount work for the DCT??? Nice how to by the way.

Sent from my SM-G900P using FF Mobile

sailor 07-05-2016 11:19 PM

Moved to Duratec TiVCT Performance section where the other mount threads are located.

ChalupaJones 07-06-2016 05:01 AM

Turbo Tech Racing Driver Side Upper Transmission Mount Ford Focus 2.0L NON-Turbo
 
Thanks sailor.

Glad you liked the how to Fabio, that's my first relatively involved install how to.

Mike at RDC is going to confirm for me if the bottom bracket of the mount for the mtx is the same on the DCT. If it is then it should fit without issue.

TurboTechRacing 07-06-2016 09:46 AM

Thanks for the orders!

Fabio0716 07-06-2016 11:18 AM

Quote:

Originally Posted by ChalupaJones (Post 9955473)
Thanks sailor.

Glad you liked the how to Fabio, that's my first relatively involved install how to.

Mike at RDC is going to confirm for me if the bottom bracket of the mount for the mtx is the same on the DCT. If it is then it should fit without issue.

Awesome let me know! :) things are getting exciting. Cams, turbo kits, new mounts, etc... Things are ramping up on this platform :) I see a Civic eater in the near future.

Sent from my SM-G900P using FF Mobile

Medina623 07-06-2016 06:14 PM

How many mounts are there? I was looking at the fswerks insert mount


Sent from my iPhone using FF Mobile

ChalupaJones 07-06-2016 06:25 PM

That's for the rear motor mount.


All times are GMT -5. The time now is 04:35 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.