|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Fanatics Online: 809 |
| Guest Online: 714 |
|
|
| Threads: 227,619 |
| Posts: 3,415,154 |
| Members: 67,578 |
|
|
|
|
 |
|
|
 |
|
| How-To : Replacing Rear Bulbs |
Warning: Neither nor its Members may be held responsible for the outcome of performing such a modification to ones car(Ford Focus). Such acts are performed at ones own risk, and sole responsibility must be assumed. This may include, but not limited to, the voiding of Ford vehicles factory warranty.
Always put safety first; using jackstands, eye protection, and all other required safety measures. It is also recommended to have supervision whenever possible.
|
| Items
Needed: |
1.
Phillips screwdriver
2. Cotton towel
3. Replacement bulbs |
| Install
Time: |
Difficulty
Level: |
| 30
Minutes |
4 |
| Directions: |
 |
Step
1
Unscrew the rear light-bulb housing with a
Phillips screwdriver. |
 |
Step
2
Remove the rear bolt from inside the car. |
 |
Step
3
Using a soft towel, pull the rear housing back with some moderate
force. |
 |
Step
4
Replace the bulbs and reinstall the
housing. The top bulb is for the brakes
and signal indicator. The bottom one is
for the reverse
lamp. |
|
|
|
|
|
|
|