Create New Account
Focus Fanatics Merchandise
Ford Focus Forums
Ford Focus Regional Forums
Active Ford Focus Topics
Ford Focus How Tos
Ford Focus Links
About Focus Fanatics
Contact Focus Fanatics

How-To : Replacing Front Indicator Lamps
Warning: Neither Focus Fanatics nor its Members may be held responsible for the outcome of performing such a modification to ones car(Ford Focus). Such acts are performed at ones own risk, and sole responsibility must be assumed. This may include, but not limited to, the voiding of Ford vehicles factory warranty.

Always put safety first; using jackstands, eye protection, and all other required safety measures. It is also recommended to have supervision whenever possible.





Items Needed:
1. Philips screwdriver
2. Flat-head screwdriver
3. Replacement bulb (SYL 12V3157K K9)
Install Time: Difficulty Level:
30 Minutes 2
Directions:
Step 1
Remove the plastic cover snaps with a small Phillips screwdriver. The snaps should just pop off with a little help from a flat-head screwdriver.

Step 2
Remove the entire cover if you are replacing both lamps, otherwise you can just pull back the cover if you are replace the right lamp.
Step 3
Unplug the lamp prior to removing it.
Step 4
Twist the lamp counter-clockwise to remove it.
Step 5
Replace the bulb and reinstall the lamp. Make sure you do not handle the bulb with your bare hands. Use a dry towel to install the new bulb.

Ford Focus Chat RoomTerms Of UsePrivacy Policy