How-To : Independent Fog Lights by Arechiga Warning: Neither Focus Fanatics nor its Members may be held responsible for the outcome of performing such a modification to ones car(Ford Focus). Such acts are performed at ones own risk, and sole responsibility must be assumed. This may include, but not limited to, the voiding of Ford vehicles factory warranty. Always put safety first; using jackstands, eye protection, and all other required safety measures. It is also recommended to have supervision whenever possible. Items Needed: 1. 12 Gauge Solid Wire  2. Wire Cutters 3. 2 Spade Lug Crimp Terminals Install Time: Difficulty Level: 5 Minutes 2 Directions: Step 1 Locate the fuse box inside the engine bay. Step 2 Open the cover to the fuse box. Step 3 Locate and remove R13. You will find that the pins from R13 create a design similar to the following: |  |  |   ---   --- (We will call the bottom two "holes" 3 and 5) Step 4 Using the 2" wire with the attached Spade Lug Crimp Terminals, place one end into 3 and the other into 5. Make sure there is a snug fit.