|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Fanatics Online: 367 |
| Guest Online: 640 |
|
|
| Threads: 226,612 |
| Posts: 3,395,346 |
| Members: 67,383 |
|
|
|
|
|
|
|
|
|
|
|
|
| How-To : Electronic Odometer by rpwsrw |
Warning: Neither nor its Members may be held responsible for the outcome of performing such a modification to ones car(Ford Focus). Such acts are performed at ones own risk, and sole responsibility must be assumed. This may include, but not limited to, the voiding of Ford vehicles factory warranty.
Always put safety first; using jackstands, eye protection, and all other required safety measures. It is also recommended to have supervision whenever possible.
|
| Items
Needed: |
| None |
| Install
Time: |
Difficulty
Level: |
| 5
Minutes |
1 |
| Directions: |
Step 1
Insert Key (do not turn it) |
Step 2
Press and hold the Trip-Meter Reset Button.
|
Step 3
While holding the reset button, start your car and continue holding the button. |
Step 4
Within 10 seconds, the display should change to "test" (written in a silly LCD font) and the needles will go nuts. Release the Button. |
Step 5
Pressing the button will now cycle through some 15 different modes or more. |
Breakdown of some of the functions:
1 Press - Shows a Gauge Sweep
2 Presses - Shows all 8's on the LCD (LCD TEST)
3 Presses - Illuminates all the bulbs on the dash
6 Presses - Shows DTC Troubleshooting Codes
7 Presses - DIGITAL SPEEDOMETER - MPH
8 Presses - DIGITAL SPEEDOMETER - KPH
10 Presses - DIGITAL TACHOMETER |
|
|
|
|
|
|
|
