|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Fanatics Online: 366 |
| Guest Online: 642 |
|
|
| Threads: 226,612 |
| Posts: 3,395,347 |
| Members: 67,383 |
|
|
|
|
|
|
|
|
|
|
|
|
| How-To : Sparkplug Removal, Sparkplug Change, Changing Sparkplugs |
Warning: Neither nor its Members may be held responsible for the outcome of performing such a modification to ones car(Ford Focus). Such acts are performed at ones own risk, and sole responsibility must be assumed. This may include, but not limited to, the voiding of Ford vehicles factory warranty.
Always put safety first; using jackstands, eye protection, and all other required safety measures. It is also recommended to have supervision whenever possible.
|
| Items
Needed: |
1.
Motor Oil
2. Funnel
3. Shop or paper towel |
| Install
Time: |
Difficulty
Level: |
| 10 Minutes |
1 |
| Directions: |
 |
Step
1
Park your car on a level surface and let
the engine cool for 30 minutes. Remove the
dipstick from the engine. |
|
Step
2
Wipe away the oil from the dipstick. |
 |
Step
3
Reinsert the dipstick
and remove immediately. |
 |
Step
4
Check the oil level on the dipstick. If
the oil level is low then please proceed
to the next step. Otherwise reinsert the
dipstick and your task is complete. Your
ideal oil level is in between the two
indicators on the dipstick. |
 |
Step
5
Remove the oil cap from the engine by
turning it counter-clockwise. |
 |
Step
6
Insert a funnel into the hole. |
 |
Step
7
Slowly poor about a quarter quart of oil
into the funnel and repeat step 1 until
your oil is at the proper level. Recap
your oil cap once everything is complete. |
|
|
|
|
|
|
|
