Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   ZETEC Performance (2000-2004) (
-   -   A/C and power steering delete, need help on belt size (

zGOTxBOOST2 01-15-2006 10:24 PM

A/C and power steering delete, need help on belt size
I am doing weight reduction.

I have already delete the A/c and simply added a pulley in the compressors place.

I have recently came acrossed a way to by-pass both units with re-routing the belts and using a smaller belt.

Thats where I need your help. I have the F/C UDP kit whick uses the STOCK belt due to the bigger water pump pulley.

That being said, I need to find the smaller belt size to re-rout the belt to bypass the a/c compressor AND the power steering pump.

As always Thank you for your help with the NOob :fathand:

zGOTxBOOST2 01-15-2006 10:29 PM

Where the GREEN lines are, disregaurd the REd lines and arrows.

peanuts_parts 01-16-2006 12:09 PM

like i told u on Lose the FC water pump pulley and go with the belt i have for sale or geta new one. if u don't want to lose the FC waterpump pulley, just get a 49" belt. Go to ur local part store, and ask them for a 49" sepertine belt.

Before u do this, i want to worn u it's a lot of work. I took me a total of 2 days. and u still have to find that manual rack and pinion.

peanuts_parts 01-17-2006 12:45 AM

Sorry I'm wrong, keep the FC water pump pulley

ozan 01-17-2006 04:35 PM

i also asked AC deleting a week ago but there were no satisfying replies.. and i see that it is the best way to put a pulley instead of AC comp. pulley. so how much does the AC weigh? i am also thinking about AC deleting but i am not sure if it will worth or not...

zGOTxBOOST2 01-17-2006 10:10 PM

40 lbs, I may have a a/c delete pulley for sale .

Just need to figure this out first

ozan 01-18-2006 04:51 PM

40lbs?? ohhh it really worth removing... i want to ask another thing.. when you are re-routing the belt, the length of belt around the crank pulley ( i meant the length of friction surface around the crank) reduced nearly 1/3 ... does it couse any problem ?? like cousing the belt slipping around the crank???

zGOTxBOOST2 01-23-2006 06:47 PM

According tot he Zx2 peeps who HAVE done it, have no problems and drive there cars daily, talk to peanutsparts. I am removing P/S pump AND A/C wich is probably about 75lbs or so.

But this ISN'T comforatable for daily driving :(

Lighter For RACE :)

zGOTxBOOST2 01-23-2006 06:48 PM

just help me find the perfect belt, so far its looking like a 43" belt.....

zGOTxBOOST2 01-23-2006 06:50 PM

Peanut, what belt did you use when you had afx and ODP? Myn should be VERY close to that set-up due to the bigger alternator pulley you had .

All times are GMT -5. The time now is 06:16 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.