Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   ZETEC Performance (2000-2004) (
-   -   Cylinder head valves (

focuzed1 01-10-2013 04:21 PM

Cylinder head valves
Does anyone know where i can get some upgraded stock size valves and seals to rebuild a head? See I have all the power i currently want or need and broke a valve due to water intake. The motor is just fine i just need a new head. I currently have a stock head on my car so and i have heard several times that the limits of the stock head are about 17psi. I have been running 25psi for a while. Im assuming i have just been pretty lucky with the stock valve train. So i figured while im in there and have to mess with that stuff anyways, why not go ahead and upgrade so they can handle my boost better. And before anyone tells me that i should just upgrade to better head and valves such as ported. I am currently putting down 478whp and 482 ft of tq. I really dont want any more power. So all i want to do is upgrade the stock stuff with upgraded stuff to handle my power better and that way i dont have to worry about it any more. Thanks for any help.

1turbofocus 01-10-2013 04:46 PM

I dont think you need to port at all , Ford has some valves out but they were over sized , I dont know of anyone that ever made a stock one piece stainless valve

The stock valves are quite good , why mess with it ???? maybe change the springs and you can do that with the head on


focuzed1 01-11-2013 11:01 AM

ok what about better seals? since i have to replace the valves anyways what about the seals and the rest of the stuff? or is the myth about the stock head only handling that kind of power just that.. a myth?

ZXthrizzle05 01-11-2013 12:04 PM

im so glad your motor wasn't dead man.

focuzed1 01-11-2013 04:55 PM

me too.. i really didnt want to part the car out. haha. I have a soft spot in my heart for it. And in a way i kinda wanted to keep it. Even though my new toy is pretty beautiful and insane..

1turbofocus 01-12-2013 12:31 AM

Myth because your doing it LOL

Seals you can get the Ford seal or the Fel-Pro , both work great and you wont hear that much from me on Ford seals

Like stated above wouldnt hurt to do springs


All times are GMT -5. The time now is 12:22 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.