Rear swaybar : Steeda 21mm or Progressive 22mm ???
My 2010 SE doesn't have a rear stabilizer bar right now, and within 1-2 weeks she's gonna be equipped with the FRPP 1.5"-drop springs/dampers, and I want to add a rear swaybar too [:)]
Should I get the Steeda 21mm kit or the Progressive 22mm kit ?
The Progressive kit supposedly doesn't come with some mounts that I may need, since I have a newer model that may not have mounting holes ?
06-25-2011 07:28 PM
I have the Progress 22mm bar with SVT suspension and it is indeed very nice.
In your situation I would get the kit from Steeda, because it is a kit.
I have heard that they have a 22mm bar availible in a kit that they just haven't updated their website yet. I would probably call and find out.
06-25-2011 07:46 PM
if you dont have the mounting holes youll need the steeda kit. be sure to have the plates welded to the subframe. Mine clunked and squeaked until I did that
06-25-2011 08:03 PM
The Svt rear sway is 21mm. If u want just a swaybar get a used Svt one for cheap. If u want more go with the h&r 24mm. Why spend the money to only go up 1mm? 22mm progress?
06-25-2011 08:04 PM
I have the FRPP kit on my 2010 S, I went with the Steeda 21mm kit and it made a big difference in handling. Just like you, I didn't have any factory mounts and thats why I got the Steeda. Still have to get the plates welded to stop the noise but thats what the radio is for. Good luck and enjoy.
06-25-2011 08:07 PM
I'm ordering the Steeda kit [:)]
Thanks guys [headbang]
06-25-2011 08:09 PM
I ran the steeda brakets with my h&r 24mm on.my 06 zx3
06-26-2011 12:14 AM
I've got the Steeda kit and I don't have the brackets welded but I do have everything as tight as I could get it and I don't have any noise coming from my brackets . :)
06-26-2011 01:29 AM
I also have the steeda kit on my 08 there is no noies I used the rubber pading on the front and back side.
06-26-2011 02:55 AM
Thanks guys ... I plan on having the brackets welded ... my installer does an awesome job welding ... [:)]