Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   Wheels & Tires (
-   -   Rear Sway Bar Install (

Bochet 11-07-2007 01:08 PM

Rear Sway Bar Install
I have an 05 ZX3 S which came without the rear sway bar. I will be receiving a rear SVT sway and all the hardware needed to mount it shortly. I searched on here but did not find what I was looking for.

Has anyone installed a rear sway on a car that previously was unequipped? Instructions? Suggestions?

ttvines 11-07-2007 01:13 PM

I installed a rear sway bar on the focus and its pretty straight forward. Just go search and download a FSM if you need some instructions.

SYZ 11-07-2007 01:20 PM

I also have a 2005 ZX3 S, which did not come with a rear sway bar. Steeda sells a kit that will allow you to bolt up their sway bar. I believe it's a 21mm bar as well.

Or, you could get the aluminum sway bar clamps that BiscuitNinja sells and use whatever rear bar you want. Make sure that the bar comes w/ the hardware to mount it though, otherwise you will have to get the endlink separately.

Personally, my setup is the BiscuitNinja aluminum clamps w/ the Saner/Auto-X ZTS 24mm adjustable rear swaybar. Total cost was around $250. Steeda's kit is about $150, but its not as beefy. Your choice.

BTW, this should be in the suspension section.

honhon 11-07-2007 02:53 PM

*Moved to Suspension Forum*

as nigle said you'll need brackets... if your S model does not have the sub-frame mounts you'll need the brackets that are custom made or the steeda kit... unfortunately things like this are not specific accross the board on the fofo.

All times are GMT -5. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.