I have just recently changed my clutch about 5000 miles at most ago I put a oem luk clutch and flywheel in it. Now I have a jrsc and it will slip sometimes so my question is can I use the luk flywheel and put a clutch masters stage 2 or 3 disk and pressure plate or will I have to but the flywheel again
03-04-2013 04:07 AM
I believe that you have to use the CM flywheel IIRC
Did you break in the OEM clutch properly?
03-04-2013 05:21 AM
To break it in don't you Judy's be easy on if to about 500 miles
03-04-2013 05:50 AM
Yes, preferably 500 miles of start stop driving for mine(centerforce). The LUK should be 300-400 and you should be fine.
03-04-2013 06:08 AM
It slips bad and when I was na It wouldn't grab 2nd good on a hard pull