My fog lights dont work, i also never had the desire to use them so im debating on making an air induct spot. instead of having it ontop of the radiator like it is stock i want to make it where the drivers side fog light is. does anyone know what type of hose will hold up to the heat and is flexible enough to bend it down there and around everything?
01-21-2013 06:06 PM
ram air cool
01-21-2013 07:02 PM
Get the hose used for brake ducts
01-21-2013 07:47 PM
^and where would i get this?
01-25-2013 08:27 AM
01-25-2013 09:42 AM
You can buy brand new foglights from eBay in regular, smoked & a bronze, a set of 2 is around $60 if I remember correctly.
01-25-2013 09:38 PM
The factory hose that normally mounts to the scoop on top of the radiator should be almost long enough. It's probably about 8-10 inches too short but if you used that you'd only have to buy a small piece of new hose to make up the difference.
01-27-2013 04:58 PM
Real helpful individuals, eh?
Internet, well no shit.
Guess you have no idea either, huh kiddo?
Heat Riser Tube. It's insulated convoluted tubing that was used for a good many years on late model vehicles. If you get a knowledgeable parts store employee they'll know exactly what it is. IIRC you should be able to find large sizes; the sizes used on cars/trucks were in the 1-7/8" range.
01-28-2013 07:52 PM
My car has this tube from the fog light.
It's a orange colored tube not sure where it came from was in the car when I got it.
01-28-2013 07:53 PM
It goes rate to the k&n air filter pretty cool not sure how much it helps but I can take a picture of the set up.