Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (http://www.focusfanatics.com/forum/)
-   SVT Performance (2002-2004) (http://www.focusfanatics.com/forum/svt-performance-2002-2004/)
-   -   Throttle body i.d. help (http://www.focusfanatics.com/forum/svt-performance-2002-2004/306988-throttle-body-i-d-help.html)

nate4027 01-19-2013 11:16 AM

Throttle body i.d. help
 
As some of you may know from posting on here before I recently bought a 03 Comp Orange two door. I have had a blast working on this car so far but had a question as to what throttle body this is? I am assuming its aftermarket. It was coupled to a AEM cold air intake that was butchered together to make it work. I am going with a short ram K&N because I drive this car in the rain and don't want it sucking in water. Here is a picture of what it is, thanks for everyone's help thus far in my journey of fixing this car and doing things the right way like this car deserves.
http://imageshack.us/a/img191/8028/img0275xf.jpg

gonefhsn 01-19-2013 11:20 AM

Possibly the Steeda

http://www.steedafocus.com/parts/for...ttle-body.html

nate4027 01-19-2013 11:28 AM

http://img841.imageshack.us/img841/9548/img0277go.jpg

Uploaded with ImageShack.us

nate4027 01-19-2013 11:34 AM

I'd say your right, hopefully they put the 67mm one on it. Thanks for the help.

Sniper Focus 01-19-2013 12:35 PM

Either a Steeda or a Focus Central which was identical, IIRC the FC is 65mm. Either way the port on the intake is only a large as the stock TB diameter. The real benefit, if any, is the flat blade and smooth bore.

1lowfocus05 02-03-2013 09:56 PM

Looks like Steeda


All times are GMT -5. The time now is 02:35 AM.



Search Engine Optimization by vBSEO 3.6.1