Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum

Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum (
-   SVT Performance (2002-2004) (
-   -   When projects go wrong / torque strut mount removal mess (

dneedham 08-10-2011 01:01 AM

When projects go wrong / torque strut mount removal mess
Ever have a simple project go to hell in a hand basket? That is what happened to me when trying to replace the torque strut mount. As it turned out, the bolt that goes through the mount into the subframe had become one with the mount.

After three days of laying under the car, using a gallon of liquid wrench, breaking the head off the bolt, finally using a small hack saw to cut the bolt in half, and as a bonus damaging the threads of the nut that is welded to the top subframe, I finally got the mount out.

What a mess. Tomorrow I have to find another bolt, and hopefully get it back together. [wrenchin]

Darren Needham
Andover, Ks.
03 ZX5 SVT / CD Silver / 118k

alex62390 08-10-2011 06:39 AM

At least the hard part is now done. Install should be the easy part. good luck finishing.

volcomstone1966 08-10-2011 06:53 AM

man that f #ckin sucks

benkap 08-10-2011 07:12 AM

It should be all down hill from here, though. Tap out the welded on nut and throw in a new bolt, possibly with some anti-seize.

Grinder 08-11-2011 08:43 AM

What's the name of the aftermarket mount everyone here recommends? I need to replace mine (it's not damaged like that but it sure allows a ton of movement) and I don't want to replace it with the soft, juicy factory design..


ajmorell 08-11-2011 10:06 AM

CFM sells several of them. I went the cheap route and just bought the poly bushings for the stock mount but I haven't installed them yet

SVTF410 08-13-2011 10:00 AM

I got the CFM brand mount and love. It totally change the way the car felt while accelerating and deccel, no more slop. It's a must if you auto-x

Wildosvt 08-14-2011 12:23 PM

By far the ceapest method, And you reuse the stock dog bone mount.

I did this last fall and have had zero issues. You will feel more engine harmonics in the car no matter what mount you get. It firms up the shifting effort too.

cdsilver02 08-14-2011 07:43 PM

If you get the inserts be sure to check them every 3,000 because they can slip out of the original dog bone. I have the CFM race and I like it. Should have gone with the ordinary CFM. The amount of vibration I hear now is substantial.

QR25DE_SpecV 08-14-2011 09:57 PM

The same thing happened to me! What am I going to do about the snapped bolt in the trans?

All times are GMT -5. The time now is 07:57 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.