SPI cylinder head gasket recommendation
I have replaced the cylinder head of my car.
When I fill the coolant, the coolant is leaking from the head gasket.
Can anyone recommend a high quality head gasket so I can do it again.
Thank you very much.
Any gasket you get will work, you have to be 120% certain that both the block AND head is clean and flat, any old gasket material left on the block or head will not allow a good seal. Also use the copper spray gasket on the head gasket before installing it
Thanks a lot, when I installing the head gasket I've go check if I need something to seal it, most comments donot recommend use any maker.
So for this spray only spray on the gasket not on the head or block, right ?
|All times are GMT -5. The time now is 06:31 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.